Jump1000 also supports pass through charging, which enables you to use its output function while it gets charged. VTOMAN 1000W battery power station features 2x DC5521 output ports(12V/10A, total 120W Max) and 1x car cigarette lighter port(12V/10A, 120W Max). All of them are regulated 12V output with a max output power of 120W in total. The DC ports are suitable for powering equipment supports 12V DC input, such as car refrigerators, CPAP machines, portable tire inflator, etc.
Recharge to 80% Within 6 Hrs. VTOMAN Jump 1000 power station features 2x DC5521(5.5mm2.1mm) input ports that supports 200W Max input power in total. It can be recharged by three ways: 1Recharging by wall charger(Included): about 7 hours to full; 2Recharging by 12V car outlet(Car charger included): about 12 hours to full; 3Recharging by 200W solar panels: about 10-14 hours to full. 1x VTOMAN Jump 1000 Power station. 1x AC adapter & charging cable.1x Type-C to Type-C cable. 1x USB-A to Type-C cable. 1000W constant-power supply to power over 1000W appliances. Built-in long-lasting and durable LiFePO4 cell with up to 3,000 cycles of lifespan(To 80% of its original capacity). Features 3x230V/1000W pure sine wave AC outlets, total 1000 watts(Surge 2000W).
Dual PD 100W Type-C fast-charging output for powering MacBook, smartphones, etc. Regulated 12V/10A DC5521(5.5mm2.1mm) output and car cigarette lighter output great for powering car refrigerators, CPAP machines, portable tire inflators, car vacuum cleaners, etc.
Dual DC5521(5.5mm2.1mm) input ports with a max input power of 200W, supports charging with two solar panel in series. Built-in 12W LED Flashlight with 5 modes(Weak/Medium/Strong/Strobe/SOS). VTOMAN has been committed to solving various emergency power problems in life. Constant power is a new emergency function of our VTOMAN portable power stations, it makes it possible for the VTOMAN to power some equipment that exceeds the VTOMAN's rated power.
LIFEBMS is a battery management system by VTOMAN dedicated to improving battery safety and stability. It integrates up to 10 battery protection modes, including short-circuit protection, over-current protection, over-voltage protection, etc. Also thanks to the built-in LiFePO4 cell, the battery safety and battery life of VTOMAN power stations have been further improved, which provides you a safe charging and long-term use experience. VTOMAN Jump1000 power station supports pass-through charging for both AC and DC outputs.It enables VTOMAN to charge your devices while it getting recharged. VTOMAN Jump1000 is equipped with 2PD 100W Type-C outputs and 4USB-A outputs, providing you enough USB ports to charge your smartphones, tablets, laptops and other electric devices at the same time.
Jump 1000 features 2 DC5521(specification:5.5mm2.1mm) input ports with a max input power of 200W(The input power for single DC port is also 200W max). It supports charging by wall charger, solar panels and car outlet.
When charging by solar panels, it supports charging with two solar panel in series. You can charge it with two 100W solar panels, also you can charge with one 200W solar panel.
VTOMAN has 100W solar panel that works for all VTOMAN power stations. Q: How does the 1000W Constant-Power feature work? A: When the operating power of the device connected to the AC outlet exceeds the 1000W rated power of Jump 1000 power station, Jump1000 will not automatically disconnect the AC output, but will keep output a constant power of 1000W for your device. But it is not suitable for all appliances, and some appliances with strict voltage requirements may not work properly. If your device's running power is lower than 1000W, then you don't need to care about the constant-power.
Q: Is the DC output regulated 12V? A: Yes, Jump 1000 is built-in 2DC5521 output and 1Car cigarette lighter output, all of them are regulated 12V/10A. Q: Does it support by-pass charging?A: Yes, Jump 1000 supports by-passing charging. You can use the output function of the power station while getting charged. Q: What kind of solar panel does Jump 1000 power station support? A: The solar panel needs to meet following requirements.
1 The open circuit voltage is between 12-30V. 2 The solar panel features a DC5521(5.5mm2.1mm) connector. If it doesn't have that, you can convert it to DC5521 as well. If you need a solar panel, you can consider our VTOMAN 100W Solar Panel that works for all VTOMAN power stations. A: No, you don't need to do that, since all VTOMAN power stations are built in MPPT feature.